200 RUNNERBREAKER IMPLEMENTED IN 20 COUNTRIES WORLDWIDE
THE RUNNERBREAKER CONTRIBUTES TO THE HYDRAULIC INDUSTRY
BY HELPING THE GLOBAL ENVIRONMENT.



HOME > PRODUCTS > TRIMMING PRESS REPLACEMENT DIES


Fully patented manufactured dies.


Quick solutions to high level and diversified deburring demands.

Dies can be used for a wide range of products (FC, FCD etc.).
Modification and adjustment of dies achieved by precise machining work.
Data storage of original dies makes manufacturing of duplicates possible.
Replacement dies for other manufacturers dies is also possible by measuring products using the 3D Co-ordinate Measuring Machine.



SAMPLE

Holes are punched and trimmed from all sides in one single shot.


Separation of pouring basin, cup, etc. and deburring performed simultaneously.


Inspection and quality process is included during trimming, punching and deburring operations.


For the above samples, Punch and Drop Operation (product is discharged) and Trim and Drop Operation (burr, waste etc is discharged) are both possible.

In this case (a standard pump was used), approx. shot time is as follows;
Punch and Drop Operation = 10 sec. / shot
Trim and Drop Operation = 15 sec. / shot

These times can be increased/ decreased depending on motor, pump sizes etc.

THE EXAMPLE OF A FINISH PRODUCT SAMPLE

All types of dies accommodated, from punch and through to hold and punch types, from one block to separate dies.
Also,blades can be replaced quickly, should gouging and machining errors occur. Advice and estimates available-just send us a sample!